Environment
a. The altitude does not exceed 1000m.
b.The ambient temperature is between 5 ºC and 40 ºC.
c. The relative humidity shall not exceed 90% (at 25 ºC).
d. There are no conductive dust, explosive gases, or corrosive gases that can damage metals and insulation around.
e. There are no obvious vibrations or bumps.
Power supply requirements
a.The main circuit supply voltage is 1OKV, with a fluctuation of no more than 5%, and the three-phase imbalance is no more than 5%.
b. The power supply voltage of the control system is 220V, with a fluctuation of no more than 5%.
c. The power supply voltage of the main circuit and control system must be a sine wave, with waveform distortion not exceeding 10%.
Requirements for external circulation cooling water
a. Total hardness<60mg equivalent/L
b. Dissolved solids<300mg/L
c. PH value 7-8.5
d. Suspended solids<10mg/L
e. Conductivity<500 μ S/cm
f. Inlet water temperature ≤ 35 ºC
Electrical technical description
The electrical part of the equipment includes power rectifier transformers, intermediate frequency power control cabinets, compensation capacitor banks, water cooling systems, etc.
20T (max26T) energy-saving electric furnace
Comprehensive technical parameters
Project |
Unit |
20T Electric Furnace Data |
Electric furnace parameters |
Rated capacity |
t |
20 |
Maximum capacity |
t |
26 |
Working temperature |
ºC |
1600 |
Electrical parameters |
Transformer capacity |
KVA |
14000 |
Transformer primary voltage |
KV |
35 |
Transformer secondary voltage |
V |
1500 |
Rated power of intermediate frequency power supply |
KW |
9000-13000 |
Maximum output voltage of intermediate frequency power supply |
V |
5200 |
Rectification pulse count |
pulse |
24 |
Sensor voltage |
V |
5200 |
Working frequency |
HZ |
250 |
Transformation efficiency |
|
96% |
success rate of startup |
|
100% |
Comprehensive parameters |
Melting rate |
T/h |
16 |
Melting cycle |
min |
65-85 |
Melting power consumption below |
kwh/t |
530 |
Working noise |
db |
≤ 85 |
cooling water system |
Water supply pressure |
MPa |
0.25-0.3 |
Inlet water temperature |
ºC |
<30 ºC |
Water outlet temperature |
ºC |
<55 ºC |
cooling water |
Flow furnace body (two sets) |
T/H |
320 (purified water) |
ntermediate frequency power supply |
T/H |
120 (purified water) |
Intermediate frequency transformer |
T/H |
50 (purified water) |